Best 2009 Nissan Rogue Trailer Wiring Options- Video
Today we're going to be taking a look at the best wiring options for your 2009 Nissan Rogue. Here we have the CURT T-Connector vehicle wiring harness. Over here we have the Tekonsha T-One vehicle wiring harness. Now both of them are going to give us the same end result. They're going to give us a four-pole flat and the ability to have lights on our trailer. Now both of our kits are going to live inside of our vehicle until we're ready to tow. When we are, we can simply drop our lead down and close our hatch. more
5/24/2017 9:52:21 AM
Trailer Wiring Harness Installation - 2009 Nissan Rogue- Video
Today we are going to be installing wiring harness part number 118480 on a 2009 Nissan Rogue. We have opened up the rear hatch of the vehicle and we are going to go ahead and point out where we need to locate the connection points for our wiring harness. The connection points are actually located behind the tail light assemblies, on the inside of the vehicle, behind these panels, on both sides of the vehicle. To gain access to those, we are going to need to remove quite a few items here from the rear end of the vehicle. To release these screws here, you actually want to align the arrows. There is an arrow here on the inboard side, along with the arrow on the knob. If you align those two, it will allow these two clips to release. There are also three screws here that are holding this compartment in that we are going to need to remove as well. more
6/22/2009 3:06:47 AM
