bing tracking image

2019 Mitsubishi Outlander Custom Fit Vehicle Wiring Installation And Review Videos

     

Curt T-Connector Vehicle Wiring Harness Installation - 2019 Mitsubishi Outlander- Video

Curt T-Connector Vehicle Wiring Harness Installation - 2019 Mitsubishi Outlander

Hello, neighbors, it's Brad here at etrailer and today we're taking a look at installing the CURT Four-Pole Trailer Wiring Harness on a 2019 Mitsubishi Outlander. Adding four-pole trailer wiring harness to any vehicle with a hitch is always a good idea because even if you aren't planning on towing a trailer, it's nice to have the ability to. So if you're just getting a small utility trailer or maybe you pick up some jet skis, whatever it may be, you're gonna want this to keep you safe and legal. This is gonna plug into four-pole trailer wiring harness on the trailer, and that's gonna give you your running lights, your turn signals, and brake lights. And as far as installation goes, this is a super easy one to do. It is truly plug and play, there's no drilling required. more


Watch Video

3/8/2024 9:29:55 AM



Tekonsha T-One Vehicle Wiring Harness Installation - 2019 Mitsubishi Outlander- Video

Tekonsha T-One Vehicle Wiring Harness Installation - 2019 Mitsubishi Outlander

Shane: Hey everyone, Shane here with etrailer.com. Today, I have a 2019 Mitsubishi Outlander, and I want to walk you through how to install the Tekonsha T-One Vehicle Wiring Harness with four-Pole Flat Trailer Connector. Hang this on your vehicle, it's going to give you a lot of different options to get lighting functions to either a trailer, maybe you have a cargo carrier. To get lighting functions back to them, so you're not only safe, but you're legal. Everybody around you knows what you're doing.This wiring harness is designed to live inside of the vehicle, so when we're not using it, we simply can roll it up, put it in a compartment in the back here, and it stays out of the weather and it's ready to go for the next time. When we're ready to use it, you simply pull it out, and you want to make sure it's laying over top of this rubber piece, staying away from anywhere where the hatch attaches down there, or locks in place.This wiring harness is going to give us 2.1 amps per trigger for our stop and turn signals, and 5.6 amps per trigger for our tail lights. more


Watch Video

8/10/2020 11:28:05 AM



  1