bing tracking image

2013 Mazda CX-9 Custom Fit Vehicle Wiring Installation And Review Videos

     

Trailer Wiring Harness Installation - 2013 Mazda CX-9- Video

Trailer Wiring Harness Installation - 2013 Mazda CX-9

Speaker 1: Today, on our 2013 Mazda CX9, we are going to be taking a look at, I'm going to show you how to install a Curt T-Connector Vehicle Wiring Harness with four pole flat trailer connector, part number 56016.This is what our wiring looks like when it's installed. It's going to give you all the proper lighting functions to safely tow your trainer. It's going to come with an included dust cap that's going to help keep your connections clean from any dirt and debris. The kit is going to come with all the necessary hardware to get it installed. Let's go ahead and take a look at that now.This is what your wiring kit's going to look like when you get it. You're going to use your fuse holder, some black silicone, you're going to get your power wire that's going to run through the back of the vehicle up to the battery. more


Watch Video

11/13/2018 3:14:37 PM



Best 2013 Mazda CX-9 Trailer Wiring Options- Video

Best 2013 Mazda CX-9 Trailer Wiring Options

Speaker 1: Today we're going to be taking a look at the best wiring options for your 2013 Mazda CX9. So here we're going to have the Curt wiring harness, and in the middle is going to be the Tekonsha, and then finally over here we're going have the Hopkins.Now the way that we're going to mount our converter box in our vehicle is going to differ from each kit. Now with our Curt here, they do provide us with some double-sided foam tape so we're going to need to find a flat surface that we can mount this to. The Tekonsha also provides us with some double-sided foam tape, but we also have the option of having this tab right here. We can either zip tie it or take a self-tapping screw and firmly secure it to a flat area. The Hopkins does not provide us with any double-sided tape, but there is holes on each side of our converter box so we can zip tie it to a flat surface as well.One other thing I like about the Tekonsha is you can see there's an epoxy-type material right here where the wires are coming in from my converter box and that's going to be a padding material and this entire converter box is filled up with it so it's going to resist any kind of shock and resistance or jarring around if it's secure when we're driving down the road and has much more durability.One thing I really like about the Hopkins kit here is that most of our connections are already made. more


Watch Video

1/29/2018 10:18:57 AM



Trailer Wiring Harness Installation - 2013 Mazda CX-9 119147KIT- Video

Trailer Wiring Harness Installation - 2013 Mazda CX-9 119147KIT

Today in our 2013 Mazda CX-9, we'll be installing the Tow Ready, Custom Fit, Vehicle Wiring Harness with 4-Pole connector, Part Number 119147KIT. Now to begin our install, we're first going to go ahead and open up the rear cargo door. Next, I'll go ahead and open up the rear cargo compartment and remove the corner pieces. Then we will remove the two pushpin fasteners that secure the rear cargo compartment To remove these fasteners, we'll take a small, bladed 00:00:32 screwdriver, pry up on the center, and then remove the fastener completely. Now with the fasteners out of the way, go ahead and pull up on the center cargo tray and gently remove it from the vehicle, setting it aside for installation later. Next, for viewing purposes, we'll going to go ahead and remove the L-shaped trim piece here on the driver side. more


Watch Video

11/19/2014 6:42:25 AM



  1