bing tracking image

2012 Mazda CX-9 Custom Fit Vehicle Wiring Installation And Review Videos

     

Best 2012 Mazda CX-9 Trailer Wiring Options- Video

Best 2012 Mazda CX-9 Trailer Wiring Options

Speaker 1: Today we're going to be taking a look at the best wiring options for your 2012 Mazda CX9. Here we're going to have the CURT wiring harness. In the middle is going to be the Tekonsha. Then finally over here we're going to have the Hopkins. Now the way we're going to mount our converter box in our vehicle is going to differ from each kit. Now with our CURT here, they do provide us with some double-sided foam tape so we're going to need to find a flat surface that we can mount this to. more


Watch Video

1/29/2018 10:18:46 AM



Trailer Wiring Harness Installation - 2012 Mazda CX-9- Video

Trailer Wiring Harness Installation - 2012 Mazda CX-9

Today, on our 2012 Mazda CX-9, we'll be installing the T-One Connector withUpgraded Circuit Protected ModuLite from Tow Ready, part number 118520.Now, we'll begin the installation by opening the rear door and folding the rear seatsforward. We'll now go ahead and remove the interior panels. We'll remove the trunkfloor panel, as well as the threshold. Now, we'll set those aside for reinstallation later.Now, on both sides of the vehicle, we'll need to remove the cargo loops. We'll do thisso that we can pull the trim panels away, to gain access to the plugs in the factorywiring harness. Now, here on the drivers side, we'll need to disconnect the factoryharness here at this plug. more


Watch Video

11/29/2012 3:09:37 PM



Trailer Wiring Harness Installation - 2012 Mazda CX-9 118520- Video

Trailer Wiring Harness Installation - 2012 Mazda CX-9 118520

Today on our 2012, Mazda CX9, well be installing Tow Ready T-1 connector module light kit, part number 118520. Now, to begin our install well simply open the rear cargo door. Well need to remove the lower panel here. Well need to undo the two bolts holding in the cargo tie-downs. With our tray removed, we can go ahead and remove our rear threshold. Now, that our interiors disassembled, well peel the side panel away to expose our taillight connector. more


Watch Video

6/1/2012 10:08:30 AM



  1