Trailer Wiring Harness Installation - 2011 Mazda CX-9- Video
Speaker 1: Today on our 2011 Mazda CX-9, we're going to be taking a look at and showing you how to install the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector, part number 56016.Here's what our wiring looks like fully installed, and it's going to give us all the required lights to tow our trailer down the road, including our clearance lights, turn signals, and brake lights. When we're not towing it, it's going to store nicely out of the way right here in our spare tire compartment. Whenever we are ready to use it, as you saw, we can just pull it out, drape it down, and hook it up to our trailer.Now that we've seen how our wiring looks after it's installed, let's go show you how we got it installed.To begin our installation, we're going to open up our rear hatch, and we're going to need to remove the floor covering right here. So we can simply just fold up, and then we're going to have to pull this panel out underneath where our spare tire tools are. We come to this cover back here and we lift up and actually take the whole cover and we're going to set it aside. We're also going to need to remove this cover as well, and we'll set it aside too.On each end of our cargo area, right towards the back of our hatch, we're going to have these cargo hooks. more
1/29/2018 10:19:20 AM
Best 2011 Mazda CX-9 Trailer Wiring Options- Video
Speaker 1: Today we're going to be taking a look at the best wiring options for your 2011 Mazda CX9. Here we're going to have the CURT wiring harness. In the middle is going to be the Tekonsha. Then finally over here we're going to have the Hopkins. Now the way we're going to mount our converter box in our vehicle is going to differ from each kit. Now with our CURT here, they do provide us with some double-sided foam tape so we're going to need to find a flat surface that we can mount this to. more
1/29/2018 10:18:35 AM
