bing tracking image

2010 Mazda CX-7 Custom Fit Vehicle Wiring Installation And Review Videos

     

Trailer Wiring Harness Installation - 2010 Mazda CX-7- Video

Trailer Wiring Harness Installation - 2010 Mazda CX-7

Today on this 2010 Mazda CX-7 were going to install part number 118405 from Tow Ready. The first thing we need to do is open up the back hatch and remove the interior panels. Well remove the floor coverings, well remove the threshold, and well remove the access panels on each side of the vehicle behind the taillights. With all the panels loosened up we can go ahead start installing our wire harness. Well start on the drivers side and work our way over to the passengers side. Now there will be two connections we need to make on the drivers side, therell be the yellow wire for return signal and there will be the red wire for the brake signal and also the running lights. more


Watch Video

7/25/2012 9:02:36 AM



Trailer Wiring Harness Installation - 2010 Mazda CX-7 118249- Video

Trailer Wiring Harness Installation - 2010 Mazda CX-7 118249

Today on this 2010 Mazda CX-7 we will be installing wiring harness part number 118249. The port that we are going to be plugging into is actually located on the passenger side behind the interior panel right behind this access point in here so pull this panel back. By pulling the tape back here we can see the port that we are going to be plugging into. :26 more


Watch Video

12/22/2009 9:23:02 AM



  1