Trailer Wiring Harness Installation - 2008 Lincoln MKX- Video
Today on our 2008 Lincoln MKX, we'll be installing the Tekonsha T-One vehicle wiring harness with 4-pole flat trailer connector, part number 118551. All right. When we're ready to hook up our trailer and we've pulled our siring out of our trunk, all we've got to do is make sure our wiring is off to the side away from our trunk latch, we can shut our hatch, and e have a nice, ready-to-use connection down here to hook up to our trailer. We undo our dust cover here, hook up to our trailer, and make sure everything else is attached properly, and we're ready to hit the road and tow our trailer. When we arrive at our destination and we're ready to unhook from our trailer, once everything's unhooked, we can put our dust cover back on here, open our hatch back up, lift up our spare tire cover here, place the wire inside, close our cover, and, as you can see, it's up and out of the way. You don't have to worry about it getting snagged in something when you're loading cargo in and out of your trunk, just close your trunk and it's like it's not even there. All right, here's what our wiring harness comes with. We have our module box here, which will isolate our trailer wiring from our vehicle wiring and eliminate any possible back-feeding of voltages from our trailer into our vehicle's wiring, preventing any damage that may occur there. more
9/26/2016 12:31:01 PM
