2017 Kia Soul Custom Fit Vehicle Wiring Installation And Review Videos

Best 2017 Kia Soul Trailer Wiring Options- Video

Today we're going to be taking a look at the best wiring options for your 2017 Kia Soul. Here we have the Tekonsha T-One vehicle wiring harness, and over here we have the CURT vehicle wiring harness. Now both of our kits are going to give us a four-pole flat to hook up to our trailer and give us all the required lights, such as our turn signals, stop lights, and clearance lights. Now both of them are going to stay on the outside of the vehicle until we're ready to use them. Let's take a closer look at some of the differences. Now one of the biggest differences, although it may be small, is the dust covers. Our CURT is going to have a removable and replaceable dust cover, whereas our Tekonsha is going to be built in. Now the way these are both going to be installed is we're going to have a t-connector that's going to go in between our taillights and our wiring from our vehicle. Now one benefit that CURT does have as far as installation goes is that the wires are going to be somewhat smaller at the connection points compared to the Tekonsha here, so it will be a little bit easier to get the wires in place behind our taillights. Now both our kits are going to have converter boxes so that we know that our trailer's going to get the right signal. more

6/12/2017 7:57:19 AM

Trailer Wiring Harness Installation - 2017 Kia Soul- Video

Today on our 2017 Kia Soul we're going to be taking a look at and showing you how to install the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector, Part #118637. Here's what our wiring looks like when it's fully installed. It is going to stay on the outside of our vehicle at all times, and it will be ready whenever we're ready to tow. It's going to provide us a 4-pole flat trailer connector, and it's going to give us all the required lights when we're going down the road pulling a trailer, such as your taillights, turn signals, and brake lights. Now that we've shown you what it looks like after it's fully installed, let's show you how to install it. To begin our installation we're going to need to come to the back of our vehicle, and open up the hatch so we can gain access to our taillights. Now on each side our taillight's going to have four fasteners holding it in place. more

5/31/2017 10:22:05 AM