Curt Trailer Wiring Harness Installation - 2012 Kia Soul- Video
Hey guys, Connor here at etrailer.com. Today, we're going to be taking a look at the Curt T-connector vehicle wiring harness for our 2012 Kia soul.The Curt T-connector vehicle wiring harness offers a complete plug and play installation for our Kia soul. As you can see here, it has a nice and clean finish when attached to the bottom of the receiver tube. If we use our optional brackets, otherwise we would just have it hanging from the safety chain loops. Now hasn't mentioned, this is a plug and play install, and furthermore, it is a non-powered unit, which means we don't have to run that pesky power wire up to the vehicle's battery, which saves a lot on our install time.The Curt T-connector vehicle wiring harness is going to provide us with our basics functions for the smaller size trailers. It's going to have the running light circuit, the left and right stop and turn signal circuit as well as the right side, stop and turn signal circuits. more
11/15/2019 5:12:13 PM
Best 2012 Kia Soul Trailer Wiring Options- Video
Today we're going to be taking a look at the best wiring options for your 2012 Kia Soul. Here we have the Tekonsha T-One vehicle wiring harness, and over here we have the CURT vehicle wiring harness. Now both of our kits are going to give us a four-pole flat to hook up to our trailer and give us all the required lights, such as our turn signals, stop lights, and clearance lights. Now both of them are going to stay on the outside of the vehicle until we're ready to use them. Let's take a closer look at some of the differences. Now one of the biggest differences, although it may be small, is the dust covers. Our CURT is going to have a removable and replaceable dust cover, whereas our Tekonsha is going to be built in. Now the way these are both going to be installed is we're going to have a t-connector that's going to go in between our taillights and our wiring from our vehicle. Now one benefit that CURT does have as far as installation goes is that the wires are going to be somewhat smaller at the connection points compared to the Tekonsha here, so it will be a little bit easier to get the wires in place behind our taillights. Now both our kits are going to have converter boxes so that we know that our trailer's going to get the right signal. more
6/12/2017 7:57:36 AM
