2008 Kia Sedona Custom Fit Vehicle Wiring Installation And Review Videos

Best 2008 Kia Sedona Trailer Wiring Options- Video

Today we're going to be taking a look at the best wiring options for your 2008 Kia Sedona. Up top, we've got the Tekonsha T-1 vehicle wiring harness with 4-pole flat trailer connector, part number 118410. Next, we've got the CURT T-connector vehicle wiring harness with 4-pole flat trailer connector, part number C55503. Finally, we've got the Hopkins simple plug-in vehicle wiring harness with 4-pole flat trailer connector, part number HM11143955. The biggest difference that we're going to see between these wiring harnesses is that on the CURT and Hopkins, they're going to have about a foot longer 4-pole wiring than on the Tekonsha, and that's going to help in towing situations to where you may need a little bit of extra wire. On the Hopkins here, the last few feet of wire coming out towards the 4-pole plug come pre-wrapped to help protect it from any possible heat or rubbing on the ground or trailer. When we look at the module boxes on these wiring harnesses, the Hopkins is going to have the largest module box. more

10/28/2016 8:59:21 AM

Trailer Wiring Harness Installation - 2008 Kia Sedona- Video

Today on this 2008 Kia Sedona we are going to install part number 118410 from Tow Ready. The first steps involved is get into the back of the vehicle, pull up the hatch, and then get to the fasteners that hold the tail lights in place. We have got three fasteners to remove and then pop the light off. Now we will disconnect the tail lights from the wire harness. Push down this little tab and this connector will come apart. Now we will go over to the passenger side of the vehicle and do the same thing one more time. 00:36 more

7/30/2010 9:58:09 AM