Best 2014 Jeep Wrangler Unlimited Trailer Wiring Options- Video
Today on our 2014 Jeep Wrangler Unlimited we're going to be taking a look at the best wiring options available. The three wiring options we're going to be taking a look at, well first off with the Tekonsha, that's going to be part number 118416. The middle one here is going to be our Hopkins, and that's part number HM42635. Then last one here is going to be our CURT, part number C55124. All of our wiring harnesses are going to be great for towing a single axle trailer with two lights on the back and maybe some side marker lights. All of our wiring harness are very easy to install. They just plug inline behind our driver side taillight. more
2/28/2017 12:38:00 PM
Trailer Wiring Harness Installation - 2014 Jeep Wrangler Unlimited- Video
Today on our 2014 Jeep Wrangler Unlimited, we're going to review and install the Tow Ready Custom Fit Vehicle Wiring Harness with 4-Pole Trailer Connector, part number 118416. Now here's what our 4-flat trailer connector's going to look like once it's installed. To use it, we'll simply remove the cap, and take it out of the chain hold down. We can then plug it into our trailer. The 4 flat connectors can provide ground, running, turn, and brake signals. The yellow is for the driver's side, and the green is for the passenger's side. more
5/29/2015 8:37:12 AM
Trailer Wiring Harness Installation - 2014 Jeep Wrangler Unlimited C55124- Video
Today on our 2014 Jeep Wrangler Unlimited, we will be installing Curt T-connector Vehicle Wiring Harness, Part No. C55124. To begin our install, we'll first go ahead and remove the tail light assembly for the driver side. To remove the tail light assembly, there are two inside screw fasteners that'll need to be removed. Once we've removed these fasteners, we can go ahead and gently pop the tail light assembly out of its position and remove it completely by pressing on the wiring connector lock and removing the wiring harness from the connector. We'll go ahead and set the tail light assembly aside. Next, we'll take the 4-pole connector, drop it down to where we can pull our 4-pole connector out from underneath the vehicle. Next, we'll take the white wire with the pre-test 00:00:45 ring terminal on our wiring harness which will be the ground wire for our new 4-pole connector and secure it directly to the frame or body of the vehicle, using a self-tapping screw. It's a great location where the sheet metal doubles up for a secured round. We can now go ahead and take the T-connector and plug it into the manufacturer's wiring. One side into the manufacturer's wire, the other side into the tail light assembly. more
6/4/2014 12:27:54 PM
