bing tracking image

2016 Jeep Wrangler Custom Fit Vehicle Wiring Installation And Review Videos

     

Best 2016 Jeep Wrangler Trailer Wiring Options- Video

Best 2016 Jeep Wrangler Trailer Wiring Options

Speaker 1: Today on our 2016 Jeep Wrangler we're going to be taking a look at our best wiring options. Here laid out we've got our best wiring options. We've got the Tekonsha and the CURT. Both of these wiring options are going to give you the same results. Here you can see we've got one installed. They're both going to give you the same basic wiring for a four-pole connector for regular trailer lights. more


Watch Video

12/4/2017 2:49:20 PM



Trailer Wiring Harness Installation - 2016 Jeep Wrangler- Video

Trailer Wiring Harness Installation - 2016 Jeep Wrangler

Today on our 2016 Jeep Wrangler we're going to be showing you have to install the Tow-Ready T1 vehicle wiring harness with the four-poll flat trailer connector. Part number is 118416. Now this is what our kit's going to consist of. It's a pretty straightforward wiring setup. What we're going to do is plug this directly in line between the rear of our driver side taillight and the factory harness. That's then going to send the appropriate signals we need down to our four-pole trailer connector. more


Watch Video

7/27/2016 2:32:07 PM



Trailer Wiring Harness Installation - 2016 Jeep Wrangler C55124- Video

Trailer Wiring Harness Installation - 2016 Jeep Wrangler C55124

Today on our 2016 Jeep Wrangler we're going to take a look at and show you how to install the Curt Custom Fit T-Connector Vehicle Wiring Harness, with the 4-Pole Flat Trailer Connector. The part number is C55124. Here's what our wiring kit's going to look like. It's really simple and very straightforward. Here's what we want, that's our 4-pole trailer connector, that's going to give us tail lights, blinkers, and brakes to our trailer, or cargo carrier, whatever we've got hooked up. Then the bare terminal, that's going to be for our ground. You're going to see that's going to run through a good length of 4-pole wire. That's going to be connected right in between the driver's side tail light plug. more


Watch Video

4/7/2016 3:48:22 PM



  1