Best 2013 Jeep Wrangler Trailer Wiring Options- Video
Today on our 2013 Jeep Wrangler we're going to be taking a look at the best wiring options available. The three wiring options we're going to be taking a look at, well first off with the Tekonsha, that's going to be part number 118416. The middle one here is going to be our Hopkins, and that's part number HM42635. Then last one here is going to be our CURT, part number C55124. All of our wiring harnesses are going to be great for towing a single axle trailer with two lights on the back and maybe some side marker lights. All of our wiring harness are very easy to install. They just plug inline behind our driver side taillight. more
2/28/2017 12:38:25 PM
Trailer Wiring Harness Installation - 2013 Jeep Wrangler 118416- Video
Today on our 2013 Jeep Wrangler Unlimited well be installing Tow Ready T-1 connector, part number 118416. To begin our install well need to remove the drivers side taillight assembly. Well remove the two inside screws and then pop the taillight assembly out of its position. Here we can gain access to the manufacturers wiring and well disconnect the taillight assembly from the wiring by pressing on the locking tab and pulling the connectors apart. Next, well set the taillight assembly aside and take our Tow Ready Harness and feed it down through the opening and then underneath the foam cover at the bottom of the drivers side quarter panel. This will feed our four pole underneath the vehicle. more
9/27/2013 8:31:08 AM
