Best 2011 Jeep Wrangler Trailer Wiring Options- Video
Today on our 2011 Jeep Wrangler we're going to be taking a look at the best wiring options available. The three wiring options we're going to be taking a look at, well first off with the Tekonsha, that's going to be part number 118416. The middle one here is going to be our Hopkins, and that's part number HM42635. Then last one here is going to be our CURT, part number C55124. All of our wiring harnesses are going to be great for towing a single axle trailer with two lights on the back and maybe some side marker lights. All of our wiring harness are very easy to install. They just plug inline behind our driver side taillight. more
2/28/2017 12:38:18 PM
Trailer Wiring Harness Installation - 2011 Jeep Wrangler- Video
Today on our 2011 Jeep Wrangler, we're going to install part number C55124 from Curt. This is a Curt T-Connector Vehicle Wiring Harness. To start off our install, we're going to have to get behind the driver's side tail light. We need to remove the tail light from the vehicle. There are four screws that we have to remove. Once we have the guard off the light, we can remove the light itself from the body. Pull it away and you can see where the wire harness connects into the back of the tail light. more
10/3/2013 8:02:48 AM
Trailer Wiring Harness Installation - 2011 Jeep Wrangler 118416- Video
Today on this 2011 Jeep Wrangler were going to install part number 118416 from Tow Ready. This is our T1 wiring harness. The first thing we need to do is go ahead and remove the taillight on the drivers side. There are two screws we have to remove and then the light can be detached from the vehicle. Next well disconnect the wire harness from the light. Theres a small tab we have to push down and then you can pull it apart. more
11/21/2012 3:20:41 AM
