Best 1999 Jeep Wrangler Trailer Wiring Options- Video
Speaker 1: Today we're going to be taking a look at the best custom fit vehicle wiring for your 1999 Jeep Wrangler. Here on your left we're going to have the Tekonsha, part number 118409. Here in the center we're going to have the Hopkins, part number 42615. Then here on your right side we're going to have the CURT, part number 55363.Now what any one of these wiring harnesses are going to do for you, it's going to give you the proper lighting functions not only legally but safely tow a trailer or any of your favorite hitch-mounted accessories that may require lighting.Let's talk a little bit about how these install. With our Tekonsha and our CURT, you're going to have two sets of wires, yellow and green. One's going to go over to the driver side. more
10/23/2018 1:42:34 PM
Trailer Wiring Harness Installation - 1999 Jeep Wrangler- Video
Today on this 1999 Jeep Wrangler we are going to install part number 118409 from Tow Ready. This is their T-One wire harness. Right now we are looking at the driver side of the vehicle and our connection points are going to be behind the body work right here so pull away the plastic trim panel right here to get access to the wiring. There is a little plastic rivet right here that we have to remove. Now you have to follow the wire harness up and there will be a connection point where you unplug. This one happened to have a bunch of tape wrapped around it so uncover the tape to get to the connection harness. It is kind of hard to see but there is a little latch on the top. Push down on it and it should pop apart. 00:39 more
9/15/2010 10:09:15 AM
