Trailer Wiring Harness Installation - 2015 Jeep Patriot- Video
Speaker 1: Today on our 2015 Jeep Patriot, we're gonna be installing the T-One Vehicle Wiring Harness 4-Pole Flat Trailer Connector, part number: 118552.This wiring harness is gonna provide us with all the necessary lights for hauling our trailer. It'll give us our left turn, our right turn, brake, and tail lamps, with an included dust cover that will also allow it to be conveniently placed on our receiver for when we're ready to use it. It can stay on the outside of our vehicle the entire time.We'll begin our installation at the driver's side rear tail light. We'll have to remove this to install our harness. Go ahead and open the back hatch. We'll be removing both the push pins on the driver's side tail light. more
11/29/2017 4:34:21 PM
Best 2015 Jeep Patriot Trailer Wiring Options- Video
On this 2015 Jeep Patriot we're going to go ahead and take a look at the best wiring options available. Let's go ahead and take a look at our wiring options. We have one from Hopkins, part number HM11142175. Our next one is from Curt, this is part number C56162. And one from Tekonsha, part number 118552. These all are going to perform the same function so lets cover our similarities first. They're all going to come standard with a four pole flat trailer connector, industry standard so it'll fit all different brands so you don't have to have matching brands on the four poles. Now, all of our harnesses will come with connectors right here that will match up with perfectly with the OEM ones that are behind the taillight. more
11/16/2016 10:06:33 AM
Trailer Wiring Harness Installation - 2015 Jeep Patriot C56162- Video
Today on our 2015 Jeep Patriot, we're going to show you how to install a Curt T-Connector vehicle wiring harness with the four fold flat trailer connector part number is C56162. Here's what the wiring kit is going to look like. We've got our yellow, brown and white wire, this plugs in behind the driver side tail light. We've got our ground wire. We're going to find either a existing medal stud or we'll use a self tapping screw to ground that out. This is our module box. more
7/8/2015 1:06:57 PM
