Trailer Wiring Harness Installation - 2005 Jeep Liberty- Video
Today on our 2005 Jeep Liberty, we'll be installing the Curt Custom Fit Vehicle Wiring Harness with 4-Pole Flat Trailer Connector, part number C55382. Now to begin the install of our new wiring harness, we'll first go ahead and open up the rear cargo door and then remove the driver and passenger's side taillight assemblies. To remove the taillight assemblies, we'll remove the two fasteners that secure the plastic housing to the body of the vehicle. Then pop the rear taillight assembly out of place being careful not to break the alignment tabs underneath. Now with the passenger's side done, I'm going to move over to the driver's side and repeat the same process. We just need to work through the rear door hinge to access the two fasteners. Once they're out, to assist in remove the taillight assembly, we can also use a plastic pry tool or a flat blade screwdriver just to pop the alignment tabs out being careful not to break them. Next we'll remove the taillight assemblies, to remove the taillight assembly we'll go ahead and unlock the red locking tab then press on the connector lock and remove it from the back of the taillight assembly. more
11/12/2014 1:51:58 PM
