Best 2010 Jeep Grand Cherokee Trailer Wiring Options- Video
Today on our 2010 Jeep Grand Cherokee we'll be looking at our best trailer wiring options. All right, we have two wiring harnesses here today. Both of these provide us with a four-pole flat trailer connector. Right here we have the Tekonsha T-One vehicle wiring harness, part number 118425. Now over here we have the CURT T-Connector, part number C56009. The biggest difference that we found between our two wiring harnesses here, besides the fact that they come from different brands, is our dust covers. Our dust cover on the Tekonsha is molded into the end of our four-pole flat here so you don't have to worry about it falling off, whereas on our CURT here, it's a separate piece that slides over the end of your connector here, down the wire a little bit, and then folds back over. more
2/13/2017 4:27:26 PM
Trailer Wiring Harness Installation - 2010 Jeep Grand Cherokee- Video
Today on this 2010 Jeep Grand Cherokee we're going to show you the Curt T-connector vehicle wiring harness with a 4-pole flat, part number C56009. This is parts that you get with this part number. This is your wire harness here and this is one of the T-connectors. This T-connector goes over to the driver's side tail light. We got a second one that goes over to the passenger's side tail light. We have a white wire for ring terminal and that will go to ground on a sheet nail 00:00:27 behind the passenger's side tail light. more
7/28/2015 2:02:31 PM
Trailer Wiring Harness Installation - 2010 Jeep Grand Cherokee 118425- Video
Today on our 2010 Jeep Grand Cherokee, we'll be installing the Tow Ready T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector, part number 118425. To begin our install we'll first need to open up the rear hatch. Each taillight is secured with 2 fasteners. These are pushpin fasteners that we can take a flat-bladed screwdriver, simply pry out on the center of the fastener to release it, and then remove it. Once we have both fasteners out, we can go ahead and remove the rear taillight assembly. As you remove it be careful not to break the alignment tabs underneath. more
11/14/2014 10:11:13 AM
