Best 2007 Jeep Grand Cherokee Trailer Wiring Options- Video
Today on our 2007 Jeep Grand Cherokee we'll be looking at our best trailer wiring options. All right, we have two wiring harnesses here today, both of these provide us with a four pole flat trailer connector. Right here we have the Tekonsha T1 Vehicle Wiring Harness, part number 118425. Now over here we have the Curt T Connector, part number C56009. The biggest difference that we found between our two wiring harnesses here besides the fact they come from different brands is our dust covers. Our dust cover on the Tekonsha is molded into the end of our four pole flat here, so you don't have to worry about it falling off. Whereas on our Curt here, it's a separate piece that slides over the end of your connector here, down the wire a little bit, and then folds back over. They both serve the same purpose though. more
2/10/2017 2:07:39 PM
Trailer Wiring Harness Installation - 2007 Jeep Grand Cherokee- Video
Today in our 2007 Jeep Grand Cherokee, well be installing the tow ready T1 connector part number 118425. First, we are going to go ahead and open the rear cargo door. Now we need to remove the two pin fasteners securing the driver's side taillight housing. Once we have removed the pushpin fasteners, we'll go ahead and remove the whole light assembly. Be careful not to break the pushpin tabs on the forward edge of the tail light assembly. You need to locate the matching connector for the T1 harness, which will be the connector and socket at the top of the tail light assembly. more
5/15/2012 4:06:00 PM
