Trailer Wiring Harness Installation - 2005 Jeep Grand Cherokee- Video
Today on this 2005 Jeep Grand Cherokee we are going to be installing wiring harness part number 118394. Okay, we are at the rear of the Grand Cherokee here and we are going to go ahead and locate the ports that we are going to be plugging our wiring harness into. these ports are located directly behind the taillights on both sides of the vehicle. So, the first thing that we need to do is go ahead and remove both taillights. To do that, we need to remove the inboard screws that are holding it into place. There are two on each taillight. With those screws removed we can just kind of gently rock it back and forth to release the outboard side clips that are also holding the taillight into place. And with that pulled back, you can see on the back side of the taillight here is the port that we are going to need to disconnect and plug our harness in line to. And then for clarity, I am also going to remove this fasteners here at the bottom side of the wiring harness so I can set my taillight off to the side. 1:08 more
4/13/2010 9:25:28 AM
