Best 2011 Jeep Compass Trailer Wiring Options- Video
Speaker 1: Today we're gonna be taking a look at the best custom fit vehicle wiring harness for our 2011 Jeep Compass. Here we have the two best custom fit vehicle wiring harnesses for our Jeep Compass. Here on your left we have the Tekonsha, part number 118539, and here on your right we're gonna have the Curt, part number C56344. Let's go over some of the differences between these two.One of the big noticeable differences we're gonna see here is gonna be the size of our converter box. You can see our Curt box is a little bit bigger, which means it may be a little bit more difficult or you may be limited on certain places that you can place this one. Where your Tekonsha, it looks pretty small, so you can just about fit that one anywhere. more
8/29/2018 5:17:12 PM
Trailer Wiring Harness Installation - 2011 Jeep Compass- Video
Today on a 2011 Jeep Compass, were going to install part number 118539 from Tow-Ready. First thing we need to do is go ahead the tailgate and remove the two taillights. We have to remove these two plastic rivets so I can remove the taillights. Well disconnect the taillights from the wire harness by pushing up on this red lock right here and pushing right here so we can remove it. With the driver side done, lets repeat the same process on the passenger side. Well start installing the harness, well take half of the green wire, well run it through behind the bumper and out the bottom of the other side. more
12/16/2011 2:08:51 PM
