bing tracking image

2014 Jeep Cherokee Custom Fit Vehicle Wiring Installation And Review Videos

     

Best 2014 Jeep Cherokee Trailer Wiring Options- Video

Best 2014 Jeep Cherokee Trailer Wiring Options

Today, on this 2014 Jeep Cherokee, we're going to take a look at the best wiring options available. We'll be taking a look at two different wire harnesses here. This one is from CURT, which would be part number C56208 and this one from TEKONSHA, which is part number 118605. Now both these options here will work great with your jeep. It doesn't matter which one, they're going to perform the same function. We'll go ahead and take a look at some of the differences between the two. Now some of the differences you may think are minor. more


Watch Video

1/16/2017 9:09:34 AM



Trailer Wiring Harness Installation - 2014 Jeep Cherokee- Video

Trailer Wiring Harness Installation - 2014 Jeep Cherokee

Today, on this 2014 Jeep Cherokee, were going to install part number C56208 from Curt. This is the Curt T-connector vehicle wiring harness with a four-pole flat. Were going to need to get access back on the taillights so were going to have to open the back hatch. Now, our next step is very important. Well go to underneath the hood and disconnect the battery. Those electronics in this vehicle are so sensitive but this is essential to do this part. Well loosen up the negative terminal and just pull it off. more


Watch Video

9/12/2014 3:06:55 PM



Trailer Wiring Harness Installation - 2014 Jeep Cherokee 118605- Video

Trailer Wiring Harness Installation - 2014 Jeep Cherokee 118605

Today on our 2014 Jeep Cherokee, well be installing the tow-ready T-One Vehicle Wiring Harness with four-pole connector part number 118605. Now, to begin our install, well first go ahead and open up the rear cargo door. Then, well remove the spare tire wheel cover. Then well remove the cargo hooks here at the threshold. To remove them, well have the first pop-up plastic cap and then remove the Torx bit screw underneath. Now with those removed, we can remove the rear threshold by gently prying up on the threshold and releasing the fasteners underneath. Well set the threshold aside. Next, well remove the plastic surround in the spare tire wheel. more


Watch Video

2/17/2014 8:39:43 AM



  1