2012 Hyundai Sonata Custom Fit Vehicle Wiring Installation And Review Videos

Curt T-Connector Vehicle Wiring Harness Installation - 2012 Hyundai Sonata- Video

Hi there, Hyundai owners. Today on your 2012 Hyundai Sonata, we're going to be taking a look at and showing you how to install, Curt's Four-Pole Vehicle Wiring Harness.This is what our wiring harness looks like when it's installed. It will provide you with a four flat trailer connector, which gives you all of your necessary lighting signals, which includes your left turn signal, right turn signal, tail lamps and brake lamps to ensure your DOT compliant in all states and everybody behind you knows your intentions when going down the road. What I like about this harness is that it's an extremely quick and easy installation as it just plugs in line between your driver and passenger side tail light assemblies. There is a ground wire we have to hook up, but you can easily do that with a ground stud located behind it.There is a module that's included with this harness that is part of the harness. That module will monitor all of your lighting signals that are going to your tail light assemblies, and then the module will reproduce those on the four-pole connector for your trailer. more

8/10/2020 8:22:26 AM

Best 2012 Hyundai Sonata Trailer Wiring Options- Video

Speaker 1: Today we're gonna be taking a look at the best custom fit vehicle wiring for your 2012 Hyundai Sonata.Here on your left, we're gonna have the Curt part number C56049, and here on your right, we're gonna have a Tekonsha part number 118557. Let's go over some of the differences between these two.Two of the noticeable differences are gonna be these box right here. These are converter boxes, and what they're gonna do is they're gonna protect your vehicle from any back feed if your trailer has a wiring short. The difference between them is if you notice here on the Curt, the wires come in both sides. They're gonna connect to a circuit board. On the Tekonsha, they come in through the bottom and they connect to a circuit board inside the box. more

11/13/2018 7:52:15 PM