Hopkins Plug-In Simple Wiring Harness Installation - 2013 Hyundai Santa Fe- Video
Hi there Santa Fe owners. Today on your 2013 Hyundai Santa Fe, we're going to be taking a look at and showing you how to install Hopkins four pole flat trailer connector vehicle wiring harness. This vehicle wiring harness is going to provide you with all the necessary lighting, which is great if you're planning on using a trailer with your Santa Fe. Can also be used if you have a cargo carrier and you load it up.Many cargo carriers have light kits available. And this is another way you can get those lights to work properly, so that way everybody around you will know your intentions when going down the road. It provides your left turn signal, right turn signal, tail lamps and brake lamps, which will keep your DOT compliant in all States. more
10/17/2019 1:17:41 PM
Curt T-Connector Vehicle Wiring Harness Installation - 2013 Hyundai Santa Fe- Video
Speaker 1: Today in this 2013 Hyundai Santa Fe, we'll be having a look at and showing you how to install, the Curt Key Connector Vehicle Wiring Harness for Factory Tow Package Vehicles with a four pole flat trailer connector, part number C56332.Here's what our wiring looks like installed. This four pole flat wiring is gonna give us the basic lighting functions that we're gonna need in order to safely and legally tow our trailer. The white wire here provides your necessary ground connection between our Santa Fe and our trailer. The brown wire is for our tail light and running light signal. Now that particular wire, we have 6 amps of power output. Now 6 amps is more than sufficient to tow a trailer or several incandescent light bulbs or as many LEDs as you want since they do draw less power.Our yellow wires are left turn signal and left brake light and our green wire is our right turn signal and right brake light. more
10/16/2018 12:37:31 PM
Best 2013 Hyundai Santa Fe Trailer Wiring Options- Video
Speaker 1: Today we're going to be taking a look at the best custom fit vehicle wiring for your 2013 Hyundai Santa Fe. You're going to have either a factory tow package or a non-factory package. We're going to have three options for each one. Today I'm going to help you determine which one you're going to need. On your driver side behind your rear tire there's going to be a plastic panel. You're going to want to pull that panel down and you're going to look for two plugs on your frame rail. more
2/13/2018 2:33:05 PM
Trailer Wiring Harness Installation - 2013 Hyundai Santa Fe- Video
Today on our 2013 Hyundai Santa Fe we're going to show you how to install the Curt T-Connector Vehicle Wiring Harness with the 4-pole flat trailer connector. Part number on it is C56184. Now here you can see what the kit's going to look like. Here's our ultimate goal there. That's that 4-pole trailer connector so we can get signal to our trailer or cargo carrier to make our lights work. Now this box is going to take the signal that we're going to get from behind the driver side tail light housing and also behind the passenger side tail light housing and it's going to convert that into a usable trailer signal. more
11/2/2015 11:46:36 AM
Trailer Wiring Harness Installation - 2013 Hyundai Santa Fe 118269- Video
Today on our 2013 Hyundai Santa Fe, we're going to be installing the tow-ready vehicle wiring harness for factory tow package vehicles with a full pull flat trailer connector, part number 118269. Now we're going to go ahead and begin here underneath the vehicle. We're over underneath the drivers side of the vehicle and we're going to point out the two locations we'll be connecting our wiring harness to. It's right here and right here. Now, we'll first need to remove the plugs that are already in the connectors on the vehicle. Now in order to remove the cap, we'll need to push in on the locking tab here and gently pull outward. more
10/1/2014 4:01:33 PM
Trailer Wiring Harness Installation - 2013 Hyundai Santa Fe 18144- Video
Today, on our 2013 Hyundai Santa Fe, we'll be installing a Curt wiring harness, with a four pole flat connector, part number C56151. We went ahead and removed the spare tire just to make the installation of our wiring harness easier. Our vehicle is equipped with a factory tow package. The connections will be on the driver's side of the vehicle and are those two plugs right there. We'll need to remove the caps off of the plugs. To do so, you just press in on the little tabs and slide them rearward. more
8/13/2014 2:51:30 AM
Trailer Wiring Harness Installation - 2013 Hyundai Santa Fe 118571- Video
Today on our 2013 Hyundai Santa Fe, we'll be installing the Tow Ready, T-One Vehicle Wiring Harness, Part Number 118571. First, we'll open up the rear cargo door then we'll remove the two fasteners securing driver's side tail light housing. Next, we'll go ahead and remove the tail light housing by pulling backward towards the rear of the vehicle, popping it free from its alignment pins and fasteners underneath then we'll go ahead and press in the locking tab for the connector and remove the wiring from the tail light assembly. Next, we'll remove the rear bumper cover fastener securing here underneath the tail light assembly. We'll remove this so that we can pull out on it giving us more access to feeding our wires from underneath up into the tail light assembly area. Now, we have the driver's side tail light assembly remove, we'll go ahead and repeat the same process in the passenger side. more
1/4/2013 2:51:25 AM
