Trailer Wiring Harness Installation - 2016 GMC Terrain- Video
Hi there Terrain owners, today in your 2016 GMC Terrain, we're going to be taking a look at and showing you how to install to conscious T-One factory vehicle wiring harness. Your trailer wiring isn't going to be located here on the outside, instead it's protected from the elements by being stored on the inside. You'll find your connector underneath your cover, where you store your spare tire, and it's stored right here. Whenever you're ready to use it, you can simply unwind it, drape it over the back, making sure you avoid the striker here in the middle, and it'll pinch between our weatherstripping, which will hold it in place, but won't cause any damage to our wiring. We'll close our cover and then shut our lift gate.Here at the end, we have our standard four-pole flat trailer connector. This is going to provide us our left turn signal, right turn signal, tail lamps, and brake lamps, keeping us DOT compliant in all states. more
12/3/2019 1:12:06 PM
Best 2016 GMC Terrain Trailer Wiring Options- Video
Today on our 2016 GMC Terrain we'll be looking at our best trailer wiring options. We have three options here today. These are for GMC Terrains that do not have a tow package wiring harness on them from the factory. To the right we have the CURT t-connector vehicle wiring harness, part number 56094. In the middle we have the Tekonsha T1 vehicle wiring harness, part number 118494. Finally off here to the left we have the Hopkins plug-in simple vehicle wiring harness, part number HM11141275. The three wiring harness we have here, our CURT and our Hopkins are very simple. more
10/28/2016 8:59:44 AM
Trailer Wiring Harness Installation - 2016 GMC Terrain HM11141275- Video
Today, on our 2016 GMC Terrain, we'll be having a look at the Hopkins Plug-In Simple Vehicle Wiring Harness with 4-pole flat trailer connector, part number HM11141275. Here's what it looks like when it's all hooked up. Really easy to hook up to once we're ready to hook up to a trailer. Once we've arrived at our destination and we've unhooked our trailer, when we want to store this, little trick here. You can take your dust cover, slide it around your safety chain loop here, and then secure the dust cover back over the wiring. This will help keep your wiring from hanging down and getting snagged on something. more
10/24/2016 11:31:14 AM
Trailer Hitch Installation - 2016 GMC Terrain - Curt- Video
Today in our 2016 GMC Terrain, we're going to be taking a look at and installing the Curt T connector vehicle wiring harness, with four pole flat trailer connector, part number 5-6-0-9-4. Here's what the wiring looks like once it's installed on the vehicle. Right now, it's well hidden. It's just tucked up here behind the rear fascia. When you need it, you've got access to it. Here, it comes with this little dust cover to go over it to help keep water and any moisture out to help prevent corrosion. The system's very easy to install. more
7/15/2016 11:53:00 AM
Trailer Wiring Harness Installation - 2016 GMC Terrain 118494- Video
Today on our 2016 GMC Terrain, we'll be taking a look at and installing the Tow Ready T-One Vehicle Wiring Harness, with 4-Pole Flat Trailer Connector, part number 118494. Now we'll go ahead and test out our wiring to make sure that it's all working properly. Go ahead and connect our ground to the ground post. Then our brown wire here is going to be your taillight circuit. It should have a solid light, as it does. Now we'll go ahead and test out the left turn signal, which will be that yellow wire connected to the driver's side. Has an alternating signal, and the green should be the same for the passenger's side. more
2/22/2016 12:27:42 PM
