bing tracking image

2009 GMC Acadia Custom Fit Vehicle Wiring Installation And Review Videos

     

Curt T-Connector Vehicle Wiring Harness Installation - 2009 GMC Acadia- Video

Curt T-Connector Vehicle Wiring Harness Installation - 2009 GMC Acadia

Hello neighbors. It's Brad here at etrailer and today we're installing a Curt trailer wiring harness on a 2009 GMC Acadia. So here you can see our trailer wiring installed and hanging on our hitch here, has this nice little cap. So let's take a look. As you can see, this is what's going to plug into our trailer wiring, and that's going to allow you to send the signals from your turn signals, and your brake lights and running lights to your trailer. And that's going to allow the people behind you while towing to see what you're doing and it's going to keep you safe and legal. more


Watch Video

11/8/2021 2:21:08 PM



Best 2009 GMC Acadia Trailer Wiring Options- Video

Best 2009 GMC Acadia Trailer Wiring Options

Today we're going to look at best wiring options available for your 2009 GMC Acadia. First off we're going to have two different styles. We're going to have two from Tekonsha, and two from Curt. One style is going to be for vehicles that do not have an OEM wiring tow package on them, and the other set is going to be ones for vehicles that do have that OEM tow package. Let's go ahead and look at these two guys first. This is probably the most common out there. First off our Tekonsha. more


Watch Video

3/1/2017 11:53:04 AM



Trailer Wiring Harness Installation - 2009 GMC Acadia- Video

Trailer Wiring Harness Installation - 2009 GMC Acadia

Today on this 2009 GMC Acadia we are going to be installing part number 118451 from Tow Ready. We are at the rear of the vehicle now and we are going to be removing the driver side and passenger side tail lights. We are on the driver side right now. We are going to pop these plastic caps out that are protecting our screws so pop those off and we will have lanyard that is holding them in position. We are going to remove the bolts that are holding in our tail light. It is going to be the same on the passenger side as well. Then we are just going to pull out our tail light assembly and disconnect it. Take this tab here and pull it back and it will pop out. We are going to set the tail light aside and we are going to remove the passenger side tail light as well. 00:46 more


Watch Video

6/16/2010 7:27:23 AM



  1