Curt T-Connector Vehicle Wiring Harness Installation - 2016 Ford Transit T350- Video
Connor: Hey everybody! Connor here today at etrailer.com. We're going to be going over and showing you how to install the Curt T-Connector Vehicle Wiring Harness here for our 2016 Ford Transit Connect T-350. So the Curt T-Connector is going to provide us with the most basic four-pole trailer wiring connector. Now this basic four-pole connector is going to provide us with the right-hand stop and turn signal circuits, the left-hand stop and turn signal circuits, as well as the taillights. So those for both .. Those three or four basic functions there are going to be equipped to tow most small to medium-duty trailers. more
1/25/2021 11:08:52 AM
Tekonsha Trailer Wiring Harness Installation - 2016 Ford Transit T350- Video
Ryan: Hey, everybody. Ryan here at etrailer.com. Today on our 2016 Ford Transit-350, we're going to be taking a look at and showing you how to install the Tekonsha T-One Vehicle Wiring Harness with a 4-Pole Flat Trailer Connector. Now this vehicle wiring harness is going to allow your trailer lighting to function properly, so not only are you going to remain safe and legal, giving you that peace of mind, other motorists are also going to appreciate the fact that you're responsible enough to have proper lighting to let them know what you plan on doing while you're going down the road.Now this is going to have a power output for your stop and turn signals of 2.1 amps. For your tail lights, it's going to have a power output of 3.75 amps, so that's going to be plenty of power to run all your basic trailer lighting, if not more. Now it does have a thick and durable dust cap that'll help protect the terminals from the elements. more
4/10/2019 9:57:14 AM
Trailer Wiring Harness Installation - 2016 Ford Transit T350- Video
Today on our 2016 Ford Transit T-350, we're going to take a look at and show you how to install the Tekonsha T1 vehicle wiring harness with a four pole flat trailer connector. Part number is 118722. To begin our installation we'll open up the rear hatch here and we're going to pull the screw located right here and the one located right here so we can get this housing off of the vehicle. We'll do that with a T-25 Torx bit. Now we want to kind of pull kind of straight back on the light. There's a couple of pressure clips here we need to separate. more
2/16/2017 10:42:26 AM
