Best 2010 Ford Flex Trailer Wiring Options- Video
Hi there, Flex owners. Today in your 2010 Ford flex, we're going to be taking a look at the best wiring options. For your Flex we have two custom wiring harnesses available. On the left we have our harness from Tekonsha and on the right we have our harness from Curt. Both of these harnesses are going to provide you with a four pole flat connector at the back of the vehicle that you can plug into your trailer to get all of your necessary lighting. They're both going to be custom fit for your vehicle, and plug in between your driver's side and passenger side taillight assemblies. more
11/21/2019 1:32:25 PM
Trailer Wiring Harness Installation - 2010 Ford Flex- Video
Today on 2010 Ford Flex were going to start part # 118472 from Tow-Ready. First thing we need to do is go ahead and open up the back hatch to get access to tail lights. We need to remove our tail lights, remove the screw here and the screw here we'll lose on both sides. We need to disconnect our wiring harness from the tail light and push that on its tab right here, let's do the same thing on the passenger's side. Now I'll take our T-One harness over and drop the 4-Pole end down the bottom and we'll pull up from behind the bumper we'll do the same thing for this T-One Connector with the green wire are well. Now take your T-Connector and plug in to factory harness and your other move on to tail light were we reinstall it and then we'll take our white wire with the ring terminal and ground that to the body. more
1/12/2012 3:29:13 PM
