Curt T-Connector Vehicle Wiring Harness Installation - 2013 Ford Escape- Video
Ryan: Hey everybody, Ryan here at etrailer. Today on our 2013 Ford Escape, we're going to be taking a look at and showing you how to install the Curt T-connector Vehicle Wiring Harness. Many of our Escape customers use their SUV's to do a little bit of everything, which that does include towing. And that's where the wiring is going to come into play. Whenever you hook up to your trailer, this is going to provide you with the necessary lighting functions, not only to be safe but legal. Now probably my favorite thing about this wiring is that it has a converter box. more
5/20/2020 12:07:26 PM
Best 2013 Ford Escape Trailer Wiring Options- Video
Today we're taking a look at the best wiring options for your 2013 Ford Escape. So, here we have our wiring kits. On the end here we have the Tekonsha, this is going to be the T1, part number 118566. Then here we have the Curt, which is going to be part number C56164. Finally, here we have the Hopkins, which is going to be part number HM11140514. Now they're all going to give us the same end result. more
4/26/2017 2:52:20 PM
Trailer Wiring Harness Installation - 2013 Ford Escape- Video
Today on our 2013 Ford Escape, we're going to take a look at and show you how to install the Curt T-Connector vehicle wiring harness with a 4 pull flat trailer connector. Part number is C56164. When we're ready to use our wiring, we're going to be able to lay that right over the edge of the door. You'll see the seal here is going to give us plenty of cushion there, and allow that to go through there without having any harm done. Want to avoid the striker area. You'll see once it's closed down there, we can select the length we want, and then tuck the excess away. more
4/16/2016 6:47:01 AM
Trailer Wiring Harness Installation - 2013 Ford Escape 118566- Video
Today on our Ford Escape, we will be installing the Tow Ready T-One connector, part #118566. First, were going to begin by opening up the rear cargo access door. Then, well will remove the two fastener covers that attach to the tail light assembly on the drivers side. Once we remove the covers, we can then remove the four fastening screws here on the drivers side. Now, with the screws removed, we can go ahead and remove the drivers side tail light assembly. To do this, well gently pull and pry out this tail light assembly until it pops free. more
11/19/2012 10:46:01 AM
