Curt T-Connector Vehicle Wiring Harness Installation - 2010 Ford Escape- Video
Speaker 1: Today on our 2010 Ford Escape we're going to be installing Curt's vehicle wiring harness with a four pole flat trailer connector using part number C56329. This four pole connector is going to provide you with all your necessary trailer lighting, which includes your left turn, your right turn, tail lamps and brake lamp signals. This harness plugs inline with your existing tail lamp assemblies. The control box receives a fused power supply from the battery, so the lights going to your trailer aren't feeding off of your tail lamp circuits, but they have their own dedicated power circuit. This is great, because if you have a fault on your trailer that causes a short, or the fuse to open, it won't affect the tail lighting on your vehicle, just the fuse for the control box. Attached is a dust cap to help keep out dirt and debris, and it can also be used to help store it when not in use. more
3/20/2018 12:37:24 PM
Best 2010 Ford Escape Trailer Wiring Options- Video
Today we'll be taking a look at the best trailer wiring options for your 2010 Ford Escape. The first one we'll be taking a look at today is the Tekonsha T-One connector wiring harness for Ford Escapes without factory tow package, part number 118551. The second we'll be taking a look at today is the Tekonsha T-One connector wiring harness for Ford Escapes with factory tow package, part number 118251. Both of them are going to come with everything you need to get them installed. As you can see, the one designed for Ford Escapes with tow package is going to be a lot less complicated than the one designed without tow package. With that being said, they're both still relatively easy to get installed. If you have a factory tow package, this connector here is going to plug directly in to your tow port here in the driver's side at the rear. more
10/14/2016 11:56:11 AM
Trailer Wiring Harness Installation - 2010 Ford Escape- Video
Today, on our 2010 ford escape, we're going to show you how to install the Curt t-connector vehicle wiring harness with a four pole flat trailer connector. Part number is C56160. Here's what our wiring' going to look like. This is our ultimate goal. To have a full powered, four flat connector there at the back. To make that happen we're going to put two t-connectors. more
7/29/2015 9:16:06 AM
