Hopkins Plug-In Simple Vehicle Wiring Harness Installation - 2014 Ford Edge- Video
Hey everybody, how's it going Today, we're gonna be going over and showing you how to install the Hopkins plug-in simple trailer wiring harness here on our 2014 Ford Edge. So, a trailer wiring harness is gonna be one of the few things you're gonna need to successfully tow a trailer here with your Edge. So, in addition to the trailer wiring harness, we're gonna need a trailer hitch, as well as a ball mount/ hitch ball. The trailer wiring harness portion of it is what's gonna allow the vehicle to transmit the taillight signals to the trailer. Now, this is not only your legal requirement, in almost all states, it's also gonna be necessary to let other motorists out in the road know the signals we're gonna be making. A lot of times, our trailer is actually gonna block the taillight signals on our vehicle. more
11/24/2021 12:51:57 PM
Trailer Wiring Harness Installation - 2014 Ford Edge- Video
Today on our 2014 Ford Edge we'll be installing the Tekonsha T-One Vehicle Wiring Harness with Four-Pole Flat Trailer Connector, part number 118515. All right, now when we're ready to tow a trailer all we have to do is open up our hatch. As you can see our wiring is nice and hidden away. We'll lift up our cargo cover here, we'll grab our trailer wiring, set it to the side of our trunk latch. Let it dangle down here right where our hitch is. Close our trunk on up and we can hook up to our trailer. more
12/13/2016 10:51:20 AM
Trailer Wiring Harness Installation - 2014 Ford Edge C56120- Video
Today, on our 2014 Ford Edge, well be installing the Curt T-connector wiring harness with 4-pole flat trailer connector, part number C56120. To begin our install, we'll first open up the rear hatch. We need to locate the fasteners that secure the rear taillight assemblies. Once we've located the fasteners, we'll then go ahead and remove them. Once we remove the fasteners, we'll then go ahead and pull back on the taillight assembly to release the fasteners and alignment pins underneath. NOTE: It will be easier to remove if you take a flat-blade screwdriver or in this case we're using a plastic pry tool, get between the taillight assembly and the body of the vehicle and gently work it free. Here you can see the alignment pins underneath. Next, we'll remove the wiring connector from the taillight assembly. more
9/13/2014 10:23:32 AM
