Fifth Wheel and Gooseneck Wiring Harness Installation - 2012 Dodge Ram Dually- Video
Today on our 2012 Dodge Ram 3500 dual rear wheel, we'll be installing the Pollak fifth wheel goose neck T-connector with seven pull, part number PK11893-11932. First, we'll go ahead and locate a suitable location for our new seven pull connector. Here, just behind the rear wheel on the driver's side is a common position. Go ahead and locate the area, check underneath to make sure there are no obstructions, and then we'll go ahead and use a small pilot hole and drill it out. This will allow us to again get underneath and double check where the pilot hole location is and correspond it's where our seven pull connector will be. With that done, we can now go ahead and take the hole saw and cut out the larger hole to fit the seven pull connector. more
2/1/2013 4:30:42 AM
Fifth Wheel and Gooseneck Wiring Harness Installation - 2012 Dodge Ram- Video
Today on our 2012 Dodge Ram 2500, we are going to be installing the Pollock fifth wheel and gooseneck T-Connector with seven-pole wiring part number PK11893-11932. First, we need to begin by finding a suitable location for our seven-pole in the bed. Just here past the cut out in the bed behind the drivers side wheel well is where we are going to mount our sub pole connector. First step will be drilling a pilot hole. Ill take my eight-inch bit which will be the same as the pilot hole for hole saw that we will need to cut out. Now I can go underneath and check to make sure its not going to run into anything. more
8/9/2012 7:02:52 AM
