bing tracking image

2004 Dodge Ram Pickup Custom Fit Vehicle Wiring Installation And Review Videos

     

Trailer Wiring Harness Installation - 2004 Dodge Ram Pickup- Video

Trailer Wiring Harness Installation - 2004 Dodge Ram Pickup

Today on our 2004 Dodge Ram Pickup 2500 Series Quad Cab we're going to be installing the Hopkins Endurance Fifth Wheel and Gooseneck 90-Degree Wiring Harness with a seven-pull plug. Part number HM42137. To being with, we're going to need to choose a location in our bed to mount our seven-way plug. Now we've already gone ahead and checked underneath the bed to see where we drill our hole to make sure that there's nothing behind it that could be damaged. Now, with this being a short bed and it having a bed liner, we will need to do some extra trimming on the bed liner to allow our seven-way plug to fit against the metal. We'll go ahead and first use our hold saw to drill our hole for the plug itself. Next we're going to need to trim some of the extra bed liner away. Go ahead and put our thing up in there, make a couple marks. more


Watch Video

9/4/2014 11:37:09 AM



Fifth Wheel and Gooseneck Wiring Harness Installation - 2004 Dodge Ram 3500- Video

Fifth Wheel and Gooseneck Wiring Harness Installation - 2004 Dodge Ram 3500

Today on this 2004 Dodge 3500, we are going to install the pre-wired fifth wheel trailer connect that mounts in the pickup bed, part number 51-97-411. Start by looking for a spot to install our assembly connector. We are going to mount ours here, just behind the wheel well in the pickup bed. Using a 1/4 inch bit we will make a pilot hole so that we can use our hole saw bit to drill out a 2 inch hole so that we can mount our connector. Now you can leave your drill bit in the hole, go underneath and check to make sure you have enough clearance to fit your 7 way wiring through. Now we will go ahead and drill it out with our 2 inch hole saw bit. more


Watch Video

10/20/2011 6:58:20 AM



  1