bing tracking image

2001 Dodge Ram Pickup Custom Fit Vehicle Wiring Installation And Review Videos

     

Trailer Wiring Harness Installation - 2001 Dodge Ram Pickup- Video

Trailer Wiring Harness Installation - 2001 Dodge Ram Pickup

Today on our 2001 Dodge Ram pickup, we're going to review an install, the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector, part number C55329. Now to begin our install, we need to find the wiring behind the tail light assemblies. Behind the driver's side tail light assembly and just below the pickup bed is the manufacturers wiring that goes into the tail light assembly. We need to separate these two connectors. To do that, we'll press on the locking tab and simply separate the two. Next, we'll move over to the passenger side and repeat the same process. We're now ready to begin installing the new Curt T-connector wiring harness. On the passenger's side, we're going to use the white and green wire T-connector. more


Watch Video

6/23/2015 2:36:39 PM



Trailer Wiring Harness Installation - 2001 Dodge Ram- Video

Trailer Wiring Harness Installation - 2001 Dodge Ram

Today on this 2001 Dodge Ram pickup 1500 were gonna install part number 118329 from Tow Ready. This is a 4-pole wiring harness. Alright well go ahead and show you where the connection points are if were looking at the driver side of the vehicle it will be right behind the bumper and this is our first connection point right here. inaudible you got to push in that way and you can pull it apart. inaudible the 2 pieces well install the T-connector with the yellow wire, then well route this wire and the 4-pole wire over to the center of the hitch. Well do that by following the factory wire harness inaudible with the green wire and were now on over to the other side. more


Watch Video

12/29/2011 2:07:49 PM



  1