bing tracking image

2010 Dodge Grand Caravan Custom Fit Vehicle Wiring Installation And Review Videos

     

Hopkins Plug-In Simple Vehicle Wiring Harness Installation - 2010 Dodge Grand Caravan- Video

Hopkins Plug-In Simple Vehicle Wiring Harness Installation - 2010 Dodge Grand Caravan

Hey, everyone. How's it going Today, we're gonna be going over and showing you how to install the Hopkins Simple Plug and Play Trailer Wiring Harness here on a 2010 Dodge Grand Caravan. So, a trailer wiring harness is gonna be one of the few things that we need in order to successfully tow a trailer here with our Grand Caravan. In addition to this, we will need a trailer hitch and a ball mount/hitch ball. All of which we carry here at etrailer. Now, our trailer wiring harness simply put is gonna transfer these signals from the vehicle to our trailer, so we can let other motorists out in the road know what signals we're gonna be making. more


Watch Video

9/12/2022 8:50:34 AM



Best 2010 Dodge Grand Caravan Trailer Wiring Options- Video

Best 2010 Dodge Grand Caravan Trailer Wiring Options

Today on this 2009 Dodge Grand Caravan, we're going to show you the best wiring options available. This is pretty easy, we have two options here. We have one from Tekonsha and one from CURT. Let's go ahead and cover the differences between the two pieces we've got here. First off, let's look at the Tekonsha. The turn signal circuits, the green and yellow wires, are going to be rated for 4.2 amps per circuit, which means you can have two light bulbs on each side of the trailer. more


Watch Video

8/19/2019 12:22:14 PM



Trailer Wiring Harness Installation - 2010 Dodge Grand Caravan- Video

Trailer Wiring Harness Installation - 2010 Dodge Grand Caravan

Today on this 2010 Dodge Grand Caravan we are going to install part number 118552 from Tow Ready. This is their T-One wiring harness. The first thing we need to do is get access to the tail lights because the T connector attaches behind both tail lights so open up the hatch and start on the driver side tail light and work our way over to the passenger side. There are two screws here that we need to unbolt and our tail light should come right off. Our T connector is going to connect up to the black one right here and there is a little lock to unlatch it so you have to push that backwards and then push down this part right here, this little button and it should come apart. To make things easier we are going to remove the whole light so we are going to do the same thing for the bottom connector too, however this will not be used by the wiring harness. 00:55 more


Watch Video

10/4/2010 8:05:30 AM



  1