Trailer Wiring Harness Installation - 2007 Dodge Durango- Video
Today on our 2007 Dodge Durango we'll be installing Tow Ready T-One Connector part number 118390. To begin our installation we'll need to open the tailgate and remove the vehicle's right side taillight assembly. We'll remove the two clips holding the taillight in place. We'll then carefully pry the housing away from the vehicle, being careful not to break the alignment tab. We'll repeat this process to remove the left side assembly. We'll not go ahead and disconnect the assembly from the wiring harness. We'll slide the red locking tab on the vehicle wiring harness to the unlock position. We can then disconnect the vehicle wiring harness from both taillight sides. more
1/8/2015 6:24:14 PM
Trailer Wiring Harness Installation - 2007 Dodge Durango 118390- Video
Today on this 2007 Dodge Durango we will be installing wiring harness part number 118390. We are at the rear of the vehicle. The connection points for the wiring harness are going to be located directly behind the tail lights on both the driver and passenger side. First thing we want to do is remove those tail lights to gain access to the plug ins. To do so I have opened up the rear hatch and you can see on the inboard side we have got two retaining clips. Remove those, we can use either a rivet removal tool like the one I am using now or you can use a flat head screwdriver if you do not have one of these available to you. With those removed we just want to gently rock back and forth to release the outside clips on the tail light and with that removed you can see the port on the back side of the tail light. This is the one we are going to be connecting the wire harness into. To separate the two we just want to release the red clip at the top and push the button. Set the tail light off to the side for the time being. 00:52 more
2/17/2010 10:49:11 AM
