Trailer Wiring Harness Installation - 2004 Dodge Durango- Video
Today in our 2004 Dodge Durango, well be installing the tow ready T-One vehicle wiring harness with four-pole flat connector part number 118390. To begin our install, well first go ahead and open up the rear hatch. Then, we need to remove both rear taillight assemblies. To remove the taillight assemblies, well first need to remove the two push pin fasteners on each side. To remove the push pin fastener, well pry out on the center of the fastener and then remove the fastener completely. Once we have them both out, we can then gently rock the taillight assembly and pull it out of its position being careful not to break the alignment tails underneath. Once we have it out and away from the body of the vehicle, well then go ahead and remove the manufacturers wiring harness. To remove the wiring harness, well first need to push the red locking tab over and then press on the connector lock removing the wire connector from the socket. more
11/25/2013 8:46:11 AM
