Trailer Wiring Harness Installation - 2003 Dodge Durango- Video
Today on this 2003 Dodge Durango we're going to be installing wiring harness part number 118334. In the location of the ports we are going to be plugging our wiring harness into are located directly behind the tail lights of both the drivers and passengers side of the vehicle. In order to gain access to those these are two Phillips head screws per side, you just want to go ahead and remove those and allow the tail light to pop off. With the tail light pulled back you can see on the back side of the tail light is the connector we are going to be using. We will next need to go ahead and separate the connector from the tail light, and to do that if you look on the top side of the connector there is a red tab here, you want to go ahead and press it over, and that releases the safety clip, and then there is a push button release right here on the top as well, press that in, and pull the two pieces apart. We will go ahead and do that for the passengers side tail light as well and then we will go ahead and start plugging our harness in line. more
10/20/2011 9:56:39 AM
