Hopkins Plug-In Simple Vehicle Wiring Harness Installation - 2013 Chrysler Town and Country- Video
Hello neighbors. It's Brad here at etrailer, and today we're taking a look at installing the Hopkins 4-Pole Trailer Wiring on a 2013 Chrysler Town and Country. Having a hitch is great because you can hook up a lot of different accessories including trailers, and part of towing a trailer is making sure you have the proper light functions. That way when you have your headlights on, or your brake signal, or even your turn signal, you're gonna let the people behind you know what you're actually doing. And that's accomplished by installing a trailer wiring harness, such as this four flat. Now this is gonna be great to just plug into your trailer and it uses factory style connectors into your taillights so you'll be able to get all those functions pretty easy. more
6/1/2022 12:34:52 PM
Best 2013 Chrysler Town And Country Trailer Wiring Options- Video
Hello, everybody Clayton here at etrailer.com. And today we are going to be taking a look at the best trailer wiring options for your 2013 Chrysler Town and Country. As you can see here, we have three different options for you to look at. We have one from Tekonsha one from Curt and one from Hopkins. Now we're ready to look at some of the differences between our kits here, starting off with our Hopkins. There's not going to be any gel coating to protect the inside of our module. more
3/17/2021 1:28:00 PM
Curt Wiring Harness Installation - 2013 Chrysler Town and Country- Video
Speaker 1: Today on our 2013 Chrysler Town & Country we'll be having a look at and showing you how to install the Curt T-connector wiring harness with a four-pole flat trailer connector. Part number C56331.This wiring harness is fairly unique in the regards that we have a nice module here that is nice and sealed from the elements with this silicone gel insert in here that prevents any moisture or contamination from getting inside causing corrosion or possible damage to the sensitive electronics inside.The reason this box is a great thing to have is because this will isolate your vehicle's expensive lighting circuit from your trailer. So if you have a short on your trailer you don't have to worry about any voltage being back-fed into your Town & Country causing potential damage.Here's what our wiring looks like installed. This four-pole flat wiring harness will give us the basic lighting functions that are required by law in order for us to safely and legally tow a trailer.This white wire here provides our necessary ground connection between our Town & Country and our trailer. This brown wire here is for our taillight and our running light circuit. And on this circuit we will have six amps of total power output, which is more than adequate to tow a trailer with a few incandescent light bulbs, probably can run as many LED light bulbs as you want, because they do draw less power.The yellow wire is for our left turn signal and left brake light. more
9/27/2017 11:53:54 AM
Trailer Wiring Harness Installation - 2013 Chrysler Town and Country- Video
All right. Today on our 2013 Chrysler Town and Country, we're going to install part number C56150 from Curt. This is Curt T connector wiring harness with a 4-pole flack. First thing we need to do is get the van ready to install our wire harness. We'll go ahead and open up the back hatch and remove the tail lights. We'll need a ten millimeter socket to remove the lights. more
5/27/2014 4:08:48 PM
Trailer Wiring Harness Installation - 2013 Chrysler Town and Country 118534- Video
Today on this 2013 Chrysler Town and Country, were going to install part number 118534. To start off our install were going to open up the back hatch and were going to remove the two taillights. Our two screws that we have to remove and then well pop them loose on the body and then well go ahead and remove the wire harness from the taillight. Theres a small red lock we have to push to unlock it and then a tab that we have to push to release it from the taillight and we can pull it apart. Well set our driver side taillight to the side and do the same thing on the passenger side.Now we can go ahead and start installing the wire harness. First off well take the four pole end and well route it between the body work and the bumper cover going down to the bottom. more
2/8/2013 2:52:29 PM
