Best 2011 Chrysler Town And Country Trailer Wiring Options- Video
Hello everybody, Clayton here at etrailer.com. And today we are going to be taking a look at the best trailer wiring options for your 2011 Chrysler Town & Country. As you can see here we have three different options for you to look at. We have one from Tekonsha, one from Curt and one from Hopkins. Now we're ready to look at some of the differences between our kits here, starting off with our Hopkins. There's not going to be any gel coating to protect the inside of our module. more
3/17/2021 1:27:08 PM
Curt Wiring Harness Installation - 2011 Chrysler Town and Country- Video
Shane: Hi, I'm Shane with etrailer.com. Today you're going to be taking a look at, I'm going to walk you through the installation on the Curt Wiring Harness with four pole flat trailer connector, on our 2011 Chrysler Town and Country. Whether you're hauling a trailer or a cargo carrier that may handle some lighting functions, this wiring harness is going to allow your trailer and cargo carrier to receive those lighting functions from your vehicle.Our Curt Wiring Harness is going to have a converter box, and what that converter box is going to do, it's going to protect the factory wiring on your vehicle from any back feed from your trailer if there is a wiring issue. Our four pole connection is going to give us all our proper lighting functions on our trailer. It's going to use our brake signals, our turn signals, and our running lights.It's also going to have a nice attached dust cap that's going to protect our connections from any dirt and debris when not in use, and it can double as a holder to help keep your wiring from dragging the ground. it's gonna give us three amps per circuit for our stop and turn signals, and six amps per circuit for our tail lights, which means if we have a trailer that may have some extra lighting on it, we know that our wiring is going to be able to handle it.Now that we've gone over some features, we'll show you how to get it installed. more
4/30/2019 4:52:12 PM
Trailer Wiring Harness Installation - 2011 Chrysler Town and Country- Video
Today, on this 2011 Chrysler Town and Country, well be installing a Wiring Harness, part number 118534 from Tow Ready. Our first step will be to remove the tail lights. To do this, well be removing these two screws here on both sides of the vehicle. Well then gently rock it back and forth until it comes loose. Youll see the factory plug here, which well remove from the tail light. Push up on this red tab here to unlock it then push down on the black tab and simply pull them apart. more
7/13/2012 1:59:14 PM
