Best 2009 Chrysler Town And Country Trailer Wiring Options- Video
Hello, everybody, Clayton here at etrailer.com. Today, we're going to be taking a look at the best trailer wiring options for your 2009 Chrysler Town and Country. As you can see here we have three different options for you to look at. We have one from Tekonsha, one from Curt and one from Hopkins. Now we're ready to look at some of the differences between our kits here. Starting off with our Hopkins, there's not going to be any gel coating to protect the inside of our module. more
3/17/2021 1:26:10 PM
Trailer Wiring Harness Installation - 2009 Chrysler Town and Country- Video
Today on our 2009 Chrysler Town and Country well be installing the tow ready T1 connector, part number 118552. To start our install well first open up the rear cargo door and remove the driver side tail light housing. There are two fasteners securing the housing that we will remove first. Then well gently pry and pull the tail light assembly away from the body of the vehicle. Be careful not to break the alignment tabs as you do so. Now with our tail light assembly removed we can go ahead and unlock the red locking tab and disconnect the wiring connector from the bulb and socket. more
10/5/2012 1:17:56 PM
