Trailer Wiring Harness Installation - 2009 Chrysler Aspen- Video
Today on this 2009 Chrysler Aspen we are going to install part number 118390 from Tow Ready. This is their modulite wiring harness. The first thing we need to do is open up the back hatch of the vehicle and get to the fasteners that hold the lights in place. We are going to remove the taillights as our first step. These just have plastic fasteners that you just remove. When you pull these off, you want to kind of pull them off to the side a little bit and pull back a little bit. We can go ahead and disconnect this light for now. Just push in this red tab right here and push down this button and it comes apart. We have our driver side off. Let us go ahead and do the same thing with the passenger side. Next we are going to take our wire harness and we are going to the 4-pole end down behind the bumper, towards the ground for now. And then the lead with the red, yellow and brown wires, we are going to hook up to the wiring harness that was going into the taillight. Next we will take our white and green wire and do the same thing like we did with the 4-pole wire. Drop it behind the bumper and out of our way. 1:01 more
3/14/2011 6:19:42 AM
