Trailer Wiring Harness Installation - 2011 Chevrolet Traverse- Video
Speaker 1: Today on this 2011 Chevrolet Traverse we'll be having a look at and showing you how to install the Tekonsha T-One Vehicle Wiring Harness with a Four Pole Flat Trailer Connector, part number 118450.Here what our wiring looks like installed. Now, the reason you're going to want a four pole flat wiring on your vehicle is if you're going to tow a trailer, the four pole flat wiring will give you the basic lighting functions that are required by law in order for you to safely and legally tow a trailer. This green wire here provides your right turn signal and right brake light, yellow wire provides your left turn signal and left brake light. The brown wire is your taillight and running light signal, and the white wire provides the necessary ground connection between your trailer and your traverse.Now, on these three circuits we have a total power output of 7-1/2 amps maximum per circuit, which is more than sufficient to tow a trailer with several incandescent light bulbs per side on it. If you're running LEDs, you don't have to worry about those at all. Basically, run as many as you want because LEDs do draw significantly less power than incandescent light bulbs. more
4/12/2018 12:18:13 PM
Best 2011 Chevrolet Traverse Trailer Wiring Options- Video
Today we're going to be taking a look at the best writing options available for the 2011 Chevrolet Traverse. Now all of the harnesses that we're going to take a look today all offer the four pole flat trailer connector, two are designed for vehicles without the factory tow package, one is designed for vehicles with the factory tow package. We'll start here. This is our Curt without tow package wiring harness. That part number is C56027. We've got our inaudible 00:00:29 here, again without the factory tow package. Part number is 118450. more
3/9/2017 12:23:07 PM
Trailer Wiring Harness Installation - 2011 Chevrolet Traverse C56027- Video
Today on this 2011 Chevrolet Traverse, we're going to show you the Curt Key Connector Vehicle Wiring Harness with a four pole flat trailer connector, part number C56027. These are the parts you get with the kit. First off, we've got the T connectors here. This is the yellow that goes over to the driver's side, behind the tail light. The other half with the green wire, that goes over behind the passenger side tail light. We also have a white wire for ground which goes to the sheet metal first ground. more
5/20/2015 4:16:49 PM
