Trailer Connector Socket Installation - 2005 Chevrolet Silverado- Video
Today, on this 2005 Chevrolet Silverado Extended Cab, we're going to install Part Number HM40975. This is the Pollak 7- and 4-Pole Trailer Connector with Mounting Bracket. Typically, this part can be used as a replacement on your vehicle. However, in this case, even the original is completely missing, but we do need this original OEM socket to make it work. If you have this on your vehicle, you should be good to go. Now it's a good idea to make sure that you have this completely cleaned out, as best as you can. Let's go ahead and just set this aside for now, and we'll go ahead and mount our bracket for our 7-pole connector. Mounting your bracket is a matter of personal preference. I like using this location right here for our two holes will line up this part of the steel in the bumper. more
1/16/2015 5:05:17 PM
Trailer Wiring Harness Installation - 2005 Chevrolet Silverado- Video
Today on our 2005 Chevrolet Silverado crew cab, we're going to install part number 30955. This is a replacement multi-tow 7-way and 4-way trailer connector. We're going to replace the original 7-pole connector That came with the vehicle. This is how it came to us, so you can see that the connector has seen better days. To remove our 7-pole connector, there's a tab right here that we push down and pull out. Sometimes there may be a little gray tab or a lock that fits around this. more
11/20/2014 11:44:43 AM
Hopkins Endurance Fifth Wheel Wiring Harness Installation - 2005 Chevrolet Silverado- Video
Today, on this 2005 Chevrolet Silverado Crew Cab, this is a Hopkins Endurance 5th Wheel Gooseneck 90-Degree Wiring Harness. Were going to install part number 41157. This is actually relatively easy to install. First off, lets find a location where were going to install our 7-pole connector. In this case, it will be closer to the tailgate. Once we find our location, well go ahead and drill out a 1/4 pilot hole. After we drill out our pilot hole, well go ahead and enlarge it with a hole saw to a diameter of 2-1/8. Once we have our hole drilled out, well go ahead and install our wire harness. more
2/10/2014 5:02:19 PM
