Best 2009 Chevrolet Express Van Trailer Wiring Options- Video
Today on our 2009 Chevrolet Express we'll be looking at our best trailer wiring options. We have two wiring options here today for the Chevrolet Express Van. Now both of these options are for vehicles that don't have the factory tow package installed. Off to the right we have the CURT T-Connector, part number 55540. Over here to the left we have the Hopkins Plug-N-Tow, part number 31345. Now both of our wiring harnesses will attach in the same manner. They both will go into the factory taillight connectors in-line, no cutting, no splicing required. more
12/20/2016 8:27:33 AM
Trailer Wiring Harness Installation - 2009 Chevrolet Express Van- Video
Today on our 2009 Chevrolet Express Van, we'll be installing the tow ready T-1 vehicle wiring harness with four pull flat trailer connector, part number 118392. First, we'll go ahead and open up the rear doors of the van. Now, we'll begin over here on the passenger side. We'll need to locate the factory connector and we'll need to unplug it. We'll then add our T connector inline. To unplug the factory connection, we'll push in on the little tab right here and gently pull the connection apart. We'll then take the two connectors that are at the end of the green wire and add them inline here, making sure that when we put the connection points back together, the locking tabs fully engage. Then we'll go ahead and route our green wire up and around the door area, using a few zip ties to secure it to the factory wiring harness. more
4/21/2014 8:57:38 AM
