bing tracking image

2012 Chevrolet Equinox Custom Fit Vehicle Wiring Installation And Review Videos

     

Best 2012 Chevrolet Equinox Trailer Wiring Options- Video

Best 2012 Chevrolet Equinox Trailer Wiring Options

Today on our 2012 Chevrolet Equinox we're going to be taking a look at the best wiring options available. The two wiring options we're going to be taking a look at are the CURT T-Connedctor, and that's part number 56094. The second one is going to be the Tekonsha T-One Connector. That's part number 118494. Both are going to provide you with a four-pole flat connector for your trailer wiring at the rear of the vehicle. The main differences between the wiring harnesses are the Tekonsha here uses a power module. What this does is it connects directly to your battery, copies the signal to your trailer wiring, and prevents overloading your car's electrical system. more


Watch Video

1/19/2017 10:59:05 AM



Trailer Wiring Harness Installation - 2012 Chevrolet Equinox- Video

Trailer Wiring Harness Installation - 2012 Chevrolet Equinox

Today in our 2012 Chevrolet Equinox we'll be installing the CURT T-Connector Vehicle Wiring Harness for factory tow package, part number C56210. Now when we want to hook up to our trailer, all we have to do is lift up on our spare tire cover here, grab our wiring, set it down to the side of our trunk latch here, close our trunk on up. Now we have an easily accessible wiring harness that is stored out of the elements so we can hook it to our trailer. Take our dust cap off, hook our trailer up, plug our wiring in, we're ready to hit the road. Now when we've arrived at our destination and we unhook from our trailer, all we have to do is store the dust cap back over the plug, open our hatch back up, raise our spare tire cover, lay the wiring down inside, and it's stored up and out of the way and we don't have to worry about it getting snagged in any of our cargo when we're loading our hatch on up. It won't cause any damage to the wiring that way either and it's stored up out of the elements. Here's what our wiring kit comes with. We have our wiring harness. It'll plug into the factory tow package wiring right here and then give us a 4-pole flat to hook up to our trailer so we have all the DOT required lighting signals on our trailer, such as turn signals, brakes, and tail lights. more


Watch Video

10/19/2016 12:10:21 PM



Trailer Wiring Harness Installation - 2012 Chevrolet Equinox 18144- Video

Trailer Wiring Harness Installation - 2012 Chevrolet Equinox 18144

All right today on this 2012 Chevrolet Equinox we're going to install part number 56094 from Curt. This is a Curt T connector vehicle wiring harness with a four pole flat. All right, first thing we need to do is go ahead and get access to the wiring harness. We'll go ahead and lift up the tailgate and then we need to remove the tail lights. We'll remove the covers to get access to the fasteners. We'll do this on both sides of the car. We're going to pop them out with a screwdriver and then we'll remove the bolt inside. more


Watch Video

3/19/2014 7:51:35 AM



Trailer Wiring Harness Installation - 2012 Chevrolet Equinox 118494- Video

Trailer Wiring Harness Installation - 2012 Chevrolet Equinox 118494

Today on our 2012 Chevy Equinox, we'll be installing a Tow Ready T1 Connector, part number 118494. First, we'll need to open the rear cargo door then we'll remove the two fastener covers here on the driver's side. Next, we can go ahead and remove the two fasteners. It will allow us to remove the driver's side rear tail light assembly. We'll simply pop the tail light assembly free from the housing and being careful not to break the alignment tabs located underneath as you can see here. Next, we'll go ahead and press on the locking tab for the connector to tail light socket and remove the connector so we can set the tail light assembly aside. more


Watch Video

9/14/2012 3:44:01 PM



Trailer Wiring Harness Installation - 2012 Chevrolet Equinox 118264- Video

Trailer Wiring Harness Installation - 2012 Chevrolet Equinox 118264

Today on its 2010 Chevrolet Equinox were going to install part number 118264 from Tow Ready. This is the Wire Harness for vehicles that have a Tow package plug. First thing we do is go ahead and remove the bottom panel here and the threshold. Now the threshold pops up pretty easy from the back side here but many of the tool from the other side to pop it up. Now, the port is located underneath here behind this gray component and in this case we are going to go ahead and listen up this panel on the inside here. To make it a little bit easier to see. more


Watch Video

2/10/2012 11:07:30 AM



  1