Best 2009 Chevrolet Equinox Trailer Wiring Options- Video
Today we'll be taking a look at the best wiring options for your 2009 Chevrolet Equinox. Up top here, we've got the inaudible 00:00:07 T1, part number 118432, then here on bottom we've got the Curt, part number C56012. The biggest difference between these two harnesses is on the T1, it's got this eyelet, that's separate for the ground wire, where on the Curt, the ground wire's built in to the connector, so that it grounds to the vehicle's factory electrical system. Another difference is that here on the T1 connector, the dust cover is molded into the four pull plug. Then on the Curt, the dust cover's separate, so you'll slide it over in order to cover your plug. With both of these wiring kits, they're going to install the exact same way. They're going to have three fuses, and two relays that are going to need to be installed in the under-hood fuse box. more
10/7/2016 3:31:25 PM
Trailer Wiring Harness Installation - 2009 Chevrolet Equinox- Video
Today on this 2009 Chevrolet Equinox we are going to be installing wiring harness, part number 118432. We are in the rear cargo area of the Equinox and we are going to locate the port that we are going to be pulling the wiring harness into. This is an open ended port, which is located in the floor area of the jack storage compartment. The first thing we need to do is remove the door here and also remove the jack. I will set that off to the side for the time being. :27 more
4/27/2010 5:23:48 PM
