bing tracking image

2005 Chevrolet Equinox Custom Fit Vehicle Wiring Installation And Review Videos

     

Trailer Wiring Harness Installation - 2005 Chevrolet Equinox- Video

Trailer Wiring Harness Installation - 2005 Chevrolet Equinox

Today on our 2005 Chevy Equinox, we'll install the Curt Custom Fit Vehicle Wiring Harness with 4-pole Flat Connector, part number C55560. To begin our install, we'll first open up the hatch and then we'll remove the spare tire jack tool storage compartment. In most cases, we'll then see the spare tire jack and tools and take them out of the storage area and set them aside for installation later. However, for this application, the jack and tools are not present so there's no need to remove them. At the bottom of the compartment, we'll locate the manufacturer's tow port plug. Here is our new Curt wiring harness. We'll have the gray matching connector to match up the manufacturer's tow port. more


Watch Video

11/25/2014 10:25:54 AM



Trailer Wiring Harness Installation - 2005 Chevrolet Equinox 118391- Video

Trailer Wiring Harness Installation - 2005 Chevrolet Equinox 118391

Today we are going to install part number 118391 from Tow Ready. This is a T-1 harness for an 2005 Chevrolet Equinox. We will begin our install by getting inside the vehicle and getting to the jack storage compartment. Once you take out the jack, reach down and you can actually feel for the wire harness down here. Feel around until you find the plastic plug. It does not come out far, but you can see it right here. And you pull it up. There is not much slack in it, but that is the connector right there. It is at the very bottom of the jack storage compartment. And simply your T-1 connector will just plug right into it. And also then your ground connector can connect to the ground wire that is at the bottom of the compartment. more


Watch Video

9/10/2008 10:49:01 AM



  1