bing tracking image

2012 Chevrolet Cruze Custom Fit Vehicle Wiring Installation And Review Videos

     

Trailer Wiring Harness Installation - 2012 Chevrolet Cruze- Video

Trailer Wiring Harness Installation - 2012 Chevrolet Cruze

Today on this 2012 Chevrolet Cruze, we're going to install part number 118508. This is the T-One Vehicle Wiring Harness with a 4-Pole Flat Trailer Connector from TowReady. To start off, we need to get inside the trunk, so we'll go ahead and open the trunk lid, and our wire harness is behind the liners on the inside. We'll go ahead and take the liner from the inside here, and pull it up and out of our way. To loosen this into your panel, it gets overlapped by the threshold, so I have to remove the threshold as well. Looks like there's 2 plastic fasteners that we have to remove. more


Watch Video

10/20/2014 3:45:24 PM



Trailer Wiring Harness Installation - 2012 Chevrolet Cruze C56125- Video

Trailer Wiring Harness Installation - 2012 Chevrolet Cruze C56125

Today on our 2012 Chevy Cruze, we will be installing the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat connector, part number C56125. To begin our install, we will first open up the rear trunk and then remove the spare tire cover, or carpeted liner. Next we will need to remove the rear threshold. To remove the rear threshold, we will remove the two push pin fasteners first. Now we will go ahead and set the threshold aside and starting on the driver's side remove the three push pin fasteners and one cargo hook that secured the carpeted liner on the driver's side. Once we remove the fasteners, we will set them aside and then remove the inner panel carpeted liner. more


Watch Video

11/30/2013 9:27:38 AM



  1