bing tracking image

2019 Chevrolet Blazer Custom Fit Vehicle Wiring Installation And Review Videos

     

Tekonsha T-One Vehicle Wiring Harness Installation - 2019 Chevrolet Blazer- Video

Tekonsha T-One Vehicle Wiring Harness Installation - 2019 Chevrolet Blazer

Hi there Blazer owners. Today, in your 2019 Chevrolet Blazer, we're going to be taking a look at and showing you how to install Tekonsha's T-One 7-Pole Vehicle Wiring Harness. This is what our wiring looks like when it's installed. That's right, it looks like it's just a factory old vehicle here, but if we remove our panel here at the bottom, by spinning the screws at the bottom counter-clockwise, we've got our receiver hidden behind it, as well as our 7-pole connector, conveniently hidden behind the panel here as well. This custom fit 7-pole wiring from Tekonsha is going to provide you with a standard 7-pole here at the back of the vehicle with all the outputs fully functioning, which will include all of your necessary lighting signals, such as your left turn signal, right turn signal, tail lamps, and brake lamps, your auxiliary lighting for your backup lights, as well as a charge line, your auxiliary power circuit. It does have outfits for a brake controller as well. more


Watch Video

6/16/2020 10:42:22 AM



Curt T-Connector Vehicle Wiring Installation - 2019 Chevrolet Blazer- Video

Curt T-Connector Vehicle Wiring Installation - 2019 Chevrolet Blazer

Hi there, Blazer owners. Today in our 2019 Chevrolet Blazer, we're going to be taking a look at and showing you how to install Curt's 7-Pole Vehicle Wiring Harness. And this is what our wiring harness looks like when it's installed. That's right, it looks just like a factory vehicle, but if we remove our cover here, this will reveal our hitch as well as our wiring behind it. There's just two pins we just unthread, and here you can see hidden behind our panel, we have our receiver as well as our 7-pole connector. Included with your kit, you will receive your 7-pole connector as well as a custom-fit harness that plugs directly into the factory wiring located behind the bumper.What you don't get is the brackets to get it mounted up, because that's going to vary from the type of hitch that you have. more


Watch Video

6/16/2020 10:42:07 AM



Best 2019 Chevrolet Blazer Trailer Wiring Options- Video

Best 2019 Chevrolet Blazer Trailer Wiring Options

Hi there, Blazer owners. Today we're going to be taking a look at the best wiring options for your 2019 Chevrolet Blazer. Here we have our four wiring options available. We have two from Tekonsha and two from CURT. We'll have a seven-pole on each and a four-pole on each. Now you only see three here in the back. more


Watch Video

6/16/2020 8:02:07 AM



Tekonsha T-One Vehicle Wiring Harness Installation - 2019 Chevrolet Blazer 118720- Video

Tekonsha T-One Vehicle Wiring Harness Installation - 2019 Chevrolet Blazer 118720

Rob: Rob here at etrailer.com and today you're going to be taking a look at the Tekonsha T-One Vehicle Wiring Harness for factory tow packages on our 2019 Chevrolet Blazer. Now here's what our wiring's going to look like once we have it installed. It is going to revise the four-pole flat trailer connector, so we can have all the lights we need to get down the road safely, like our taillights, our stoplights, and our turn signals.Our wiring is going to come with an included dust cap cover that we can use to help hold it up off the ground and use it, tie it directly to the safety chain connection point because our wiring is designed to stay on the outside of our Blazer at all times. But that's a nice thing because it will be ready for us whenever we hook up to tow. And even if you're not towing a trailer, if you have any other accessories at the back of your Blazer that has lights, our wiring is going to be able to provide us those signals, whether it's a cargo carrier that has those exterior lights on it, or even just a step, it's going to make it a lot easier to plug it in than hardwire everything. And since our wiring is designed for a factory tow package, we're not going to have to cut or splice any of our factory wires, it's just going to be one simple plug-in connection point right behind the bumper here.It's fairly easy to access once we remove this panel here. more


Watch Video

9/5/2019 10:42:18 AM



Curt T-Connector Vehicle Wiring Harness Installation - 2019 Chevrolet Blazer- Video

Curt T-Connector Vehicle Wiring Harness Installation - 2019 Chevrolet Blazer

Rob: Rob here at etrailer.com. And today we going to be taking a look at the CURT t-connector vehicle wiring harness for the factory tow package, on our 2019 Chevrolet Blazer. Now our CURT wiring harness is going to provide us with a four-pole flat trailer connector, so we can have all the required lights to get down the road safely. Like our tail lights, our turn signals and our brake lights. Our wiring is designed to stay on the outside of the vehicle at all times, which is kind of nice, because it'll be ready right by our hitch whenever we want to tow. But they are going to provide us with a dust cap so we can make sure it keeps all that dirt, debris and moisture out of the connectors. more


Watch Video

9/5/2019 10:32:36 AM



  1